Penstock Supplier to the water industry. Suppliers of:- Penstocks, stoplogs, flap valves, handstops, paddle gates, weir plates & scum boards, flood defence equipment

Penstocks

Penstocks are designed with a flush invert as standard, to allow straight through cleansing flow which eliminates grit & debris pockets, this further reduces turbulence.

Penstocks are designed to British Standard BS 7775 : 2005.

Penstocks are straight forward to install, by using the penstock frame as a jig & drilling through the holes into the civil work. Refer to IOM for further details.

Penstocks are manufactured in cast iron, plastic, timber, stainless steel, galvanised steel or painted steel.

Penstocks can be manufactured either square or rectangular.

Penstocks are either wall mounting, channel mounting or weir type.

Wall Mounting Penstocks Series WM - 20 & WM - 30, 40 & 50 are fabricated penstocks designed for up to 6m on / off seating pressure.

Please note that Penstocks above 2000 mm are available but do not appear in the catalogue.

Channel Mounting Penstocks Series CM - 20 & CM - 30, 40 & 50 are fabricated penstocks, designed for door depth pressure.

Please note that Penstocks above 2000 mm are available but do not appear in the catalogue.

Weir Penstocks Series Weir 20 & Weir - 30, 40 & 50 are fabricated penstocks, designed for door depth pressure.

Please note that Penstocks above 2000 mm are available but do not appear in the catalogue.

Cast Iron Penstocks are manufactured for both wall mounting or channel mounting.

Cast Iron Penstocks are available from 100 mm up to 1500 mm.

For downloads please click here.